The MK-10/MK-20 Dry Bath Incubator is a microprocessor-controlled product using advanced thermoelectric technique. With this technique, more stable and accurated temperature control is achieved. Replacement is convenient with optional metal block of various specifications configured for different types of test tubes.
Dry Bath Incubator
The MK-10/MK-20 Dry Bath Incubator is a microprocessor-controlled product using advanced thermoelectric technique. With this technique, more stable and accurated temperature control is achieved. Replacement is convenient with optional metal block of various specifications configured for different types of test tubes.
Features：
1. LCD display. It is easy to set up and use
2. Simultaneous display of set and actual time, temperature
3. Temperature deflection adjusting meet with different demands
4. Easy to replace the metal blocks and is very simple to clean and sterilize
5. Microprocessor controlled incubation time and temperature
6. Beep-signal/Stop after program completed
7. Peltier design of MK-20 provides efficient thermal control
Technical Data
Model | MK-10 heating type | MK-20 heating&cooling | MK200-1 dry thermostat(加high-temperature heating) | ||
Temperature Control Range | RT.+5°C~100°C | -10℃~100℃ | RT.+5℃~150℃ | ||
Timing Range | 1min~99h59min | ||||
Temp. Control Accuracy | ±0.5℃ | ||||
Display Accuracy |
0.1℃ | @40℃：±0.3℃ | |||
Heating Time(25 to 100°C) | ≤20min | ||||
Cooling Time(20 to -10°C) |
no | ≤15min(20℃to-5℃)； ≤15min(20℃to-10℃),(RT.+25℃ ) |
(25℃ to 150℃)：≤30min | ||
Blocks | 35*1.5mlor 35*2.0mltube | 24*2.0mltube | |||
Power | 150W | 250W | 250W | ||
Dimension(mm) | 270x190x170 | 250x200x110 | |||
Net Weight | 2.5kg | 3.5kg | 3.5kg | ||
